Dongda Pump Valve — Specializing in the production of flat gate valves, pneumatic shut-off gate valves, parallel double gate valves, oilfield special valves...
Through Conduit Expanding Gate Valve is a gate valve design structure product imported from abroad. It has the function of two-way blocking and forced sealing. It can be widely used in geothermal medium, natural gas, oil and other devices such as mining, transportation, storage and transportation. ; It can also be widely used in downstream petrochemical process pipeline equipment, including various oil, gas, acid, alkali corrosive or toxic media, high temperature media, etc.
The flat gate valve is suitable for natural gas, petroleum, chemical, environmental protection, urban pipelines, gas pipelines and other transportation pipelines, venting systems and steam storage devices, as opening and closing equipment.
1. For oil and natural gas pipelines, use single or double gate flat gate valves. If you need to clean the pipeline, use single or double gate open-rod flat gate valve with diversion holes.
2. For the transportation pipeline and storage and transportation equipment of refined oil, select single gate valve without diversion hole or light flat gate valve.
3. For oil and natural gas extraction wellhead devices, single-gate or double-gate flat gate valves with dark rod floating valve seats and diversion holes are used, most of which are API16A standards, and the pressure levels are API2000, API3000, API5000, API10000, API15000, API20000.
(2 1/16”- 7 1/16” 2000-20000 PSI PR1. PR2 PSL1-PSL4 AA. BB. CC. DD. EE. FF)
4. For pipelines with suspended particles, use hard-sealed flat gate valves or knife-type flat gate valves.
5. The city gas transmission pipeline uses a flat gate valve dedicated to buried gas with a dark rod.
6. For urban tap water projects, single-gate soft-sealed open-rod flat gate valve is selected.
1. The transmission device drives the valve stem, and the valve stem drives the main gate to move up and down; the auxiliary gate moves together with the main gate under the drive of the connecting rod, so as to realize the open and close positions of the combined gate to support the upper and lower media. The circulation and truncation.
2. At the beginning and end of the movement process of the combined ram, due to the change of the position of the main and auxiliary rams with the inclined surface, the sealing surfaces on both sides of the combined ram will be tightly and expanded, so as to achieve forced sealing and to achieve sealing when opening. The protective effect of the surface.
3. When fully opened, a pair of inclined surfaces on the combined gate are separated, and both sides of the gate are pressed against the sealing surface of the valve body to isolate the medium and other impurities from entering the valve body cavity.
4. During the opening and closing process, the two slopes of the main and auxiliary gates are close to the two sides of the gate, and there is a small gap with the sealing surface of the valve body to ensure the free movement of the gate.
5. When fully closed, separate a pair of inclined surfaces under the combined gate, and make the two sides of the gate press the cover tightly to realize the absolute seal of the valve.
Design and manufacturing standards: API 6D
Structure length standard: API 6D
Connecting flange standard: ASME B16.5
Pressure temperature rating: ASME B16.34
Test inspection standard: API598
Parts materials and working conditions:
Water, oil, steam
Water, oil, steam
*The casting material complies with NACE 0175 standard
If you have any questions about quotation or cooperation, please feel free to contact us by phone 0577-67966500 or use the enquiry form below. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.
Dongfang Industrial Zone, Jiangbei Street, Wenzhou, Zhejiang